9-17
Command Line Reference
System Management Commands
country
This command configures the access point’s Country Code, which identifies
the country of operation and sets the correct authorized radio channels.
Syntax
country <country_code>
• country_code - A two character code that identifies the country of
operation. See Table 9-1 on page 9-17 for a full list of the codes.
Table 9-1. Access Point Country Codes
[no] buttons Enables the ability to clear the password(s) and/or
configurations.
MC
9-21
[no] cli-configuration Enables all CLI confirmation dialog prompts. MC
9-24
[no] console Enables the access point to be managed through a
serial port.
MC
9-23
[no] telnet Enables the access point to managed through a
Telnet connection.
MC
9-23
[no] ssh Enables remote Secure Shell access to the device. MC
9-24
[no] web-management
<plaintext | ssl>
Enables remote Web access to the device. MC
9-24
show buttons Displays button status. MC
9-25
show console Displays console status. MC
9-26
show ssh Displays ssh status. MC
9-26
show system Displays system information MC
9-27
show version Displays version information for the system MC
9-29
Command Function Mode Page
Country Code Country Code Country Code Country Code
Afghanistan AF Egypt EG Lebanon LB Russian Federation RU
Albania AL El Salvador SV Lesotho LS San Marino SM
Algeria DZ Estonia EE Libyan Arab Jamahiriya LY Saudi Arabia SA
Andorra AD Finland FI Liechtenstein LI Serbia and Montenegro CS
Angola AO France FR Lithuania LT Seychelles SC
To Next Page
Loading...
