7-45
Wireless Security Configuration
Configuring MAC Address Authentication
Web: Configuring Access Control List
The Local MAC Authentication tab shown in Figure 7-9 enables you to create
and maintain access control lists (ACLs) that can be directly applied to each
WLAN for access control.
You can modify these parameters:
■ Access Control List: Selects among preconfigured ACLs.
■ [Remove]: Updates the WLAN (BSS/SSID) interface by removing (prohib-
iting) the selected MAC configuration.
■ MAC Address [Add]: Adds the entered MAC address to selected ACL list.
■ List Name: Specifies a new list name.
■ MAC Entry: Specifies the MAC address for the list.
■ New ACL [Add]: Adds the New ACL to the list of Access Control Lists.
■
Figure 7-9. Configuring an Access Control List
To Configure the Access Control List:
1. Select Management> Local MAC Authentication tab.
2. Enter the ACL name in the List Name field.
3. Enter the MAC address in the MAC Entry field.
4. Click [Add] and the new list appears in the ACL List drop-down.
To Next Page
Loading...
