HP ProCurve 530 NA (J8986A)

9-31
Command Line Reference
System Logging Commands
Example
logging
This command configures log-related settings for the device. The no version
of the command disables relaying of log entries to the specified syslog server,
if any.
Syntax
logging <syslog_host> [syslog_port]
no logging
• syslog_host - The IP address of the receiving syslog server. The no
version of the command disables relaying of log entries to the speci-
fied syslog server.
• syslog_port - The port number of the receiving syslog server.
Default Setting
Disabled
Command Mode
Global Configuration
ProCurve Access Point 530# log
Keys: M=eMergency C=Critical W=Warning
I=Information
A=Alert E=Error N=Notice D=Debug
----- Event Log Listing: Most Recent Events First ----
I 01/03/00 03:57:15 login[29765]: root login on `ttyp0'
I 01/03/00 02:28:56 login[24466]: root login on `ttyp0'
I 01/02/00 04:00:49 login[7445]: root login on `ttyp0'
I 01/02/00 02:23:30 login[1248]: root login on `ttyp0'
I 01/01/00 07:10:33 login[28706]: root login on `ttyp0'
I 01/01/00 05:59:52 login[24293]: root login on `ttyp0'
I 01/01/00 03:00:16 login[13449]: root login on `ttyp0'
I 01/01/00 00:00:14 dropbear[602]: Not forking
ProCurve Access Point 530#