HP ProCurve 530 NA (J8986A) User Manual

9-55
Command Line Reference
Flash/File Commands
Default Setting
N/A
Command Mode
Manager Exec
Example
This example shows how to reset the startup configuration to the defaults.:
Related Commands
copy custom-default startup-config
(page 9-51)
write
This command views or saves the running configuration of the device.
Syntax
write [ memory | terminal ]
• memory - Copies the running configuration to the startup configuration
file. This is the same as the copy running-default startup-config command.
• terminal - Displays the running configuration of the device on the
terminal.
Default Setting
N/A
Command Mode
Manager Exec
Example.
Related Commands
copy running-config (page 9-53)
ProCurve Access Point 530# erase startup-config
ProCurve Access Point 530#
ProCurve Access Point 530# write memory
ProCurve Access Point 530#

HP ProCurve 530 NA (J8986A) Specifications

General

Product Number	J8986A
Device Type	Wireless Access Point
Wireless Standards	802.11a/b/g
Frequency Bands	2.4 GHz, 5 GHz
Maximum Data Rate	54 Mbps
Ports	1 x 10/100 Ethernet
Power over Ethernet	Yes
Security Features	WPA, WPA2, 802.1X
Operating Temperature	0°C to 50°C
Weight	1.1 lb (0.5 kg)