9-63
Command Line Reference
Group Configuration
• member-id - The string that identifies the access point within the group.
(Range: 1-40 alphanumeric characters)
Default Setting
None
Command Mode
Global Configuration
Example:
The following example identifies the access point in the member list as "AP1".
show group-config
The command displays the current group configuration settings for the access
point.
Syntax
show group-config
• show group-config - Displays the current group configuration settings.
Default Setting
None
Command Mode
Manager Exec
ProCurve Access Point 530# configure
ProCurve Access Point 530(config)# group-config member-id AP1
ProCurve Access Point 530(config)# write memory
ProCurve Access Point 530(config)#
To Next Page
Loading...
