HP ProCurve 530 NA (J8986A)

9-20
Command Line Reference
System Management Commands
• hostname - A text string to identify the system.
(Maximum length: 50 characters)
Default Setting
ProCurve-AP-530
Command Mode
Global Configuration
Example
domain
This command sets the system domain name suffix for hostname/domain-
name lookups, when the suffix is not obtained through DHCP. The no version
of this command clears the statically configured domain suffix.
Syntax
domain <domain>
no domain <domain>
• domain - A text string to set the domain name.
(Maximum length: 50 characters)
Default Setting
None
Command Mode
Global Configuration
Example
ProCurve Access Point 530# configure
ProCurve Access Point 530(config)# hostname Gary
ProCurve Access Point 530# configure
ProCurve Access Point 530(config)# domain example.com