HP ProCurve 530 NA (J8986A)

9-73
Command Line Reference
MAC Address Authentication
Default
None
Command Mode
WLAN Interface Configuration
Example
mac-auth-remote
This command enables remote MAC address authentication by using the
RADIUS authentication server settings on this WLAN. The no version of the
command disables remote MAC authentication on the BSS.
Syntax
mac-auth-remote
no mac-auth-remote
Default
None
Command Mode
WLAN Interface Configuration
Example
ProCurve Access Point 530# configure
ProCurve Access Point 530(config)# radio 1
ProCurve Access Point 530(radio1)# wlan 1
ProCurve Access Point 530(radio1-wlan1)# mac-auth-local Bob
accept-list
ProCurve Access Point 530(radio1-wlan1)#
ProCurve Access Point 530# configure
ProCurve Access Point 530(config)# radio 1
ProCurve Access Point 530(radio1)# wlan 1
ProCurve Access Point 530(radio1-wlan1)# mac-auth-remote
ProCurve Access Point 530(radio1-wlan1)#