HP ProCurve 530 NA (J8986A)

9-54
Command Line Reference
Flash/File Commands
• startup-config - Copies the running configuration to the startup config-
uration file. This option is functionally the same as the write memory
command.
• custom-default - Copies the running configuration to the customer-
modifiable default configuration file.
Default Setting
N/A
Command Mode
Manager Exec
Example
Related Commands
write (page 9-55)
erase
This command resets the specified configuration file stored on the device.
Syntax
erase [ custom-default | startup-config ]
• custom-default - Resets the customer-modified version of the factory-
default configuration.
• startup-config - Resets the startup-configuration to the custom-default
configuration and reloads the device.
ProCurve Access Point 530# copy running-default startup-
config
ProCurve Access Point 530#