HP ProCurve 530 NA (J8986A)

9-162
Command Line Reference
Wireless Distribution System (WDS)
– If Key Length is 104 bits and Key Type is "Hex", then each WEP
Key must be 26 characters long.
Default Setting
None
Command Mode
WDS Interface Configuration
Example
wep-key-ascii (wds)
This command sets the WDS WEP key type to ASCII when using static-wep
security. The no version of the command sets the key type to hexadecimal.
Syntax
wep-key-ascii
no wep-key-ascii
Default Setting
Enabled
Command Mode
WDS Interface Configuration
Example
wep-key-length (wds)
This command sets the WDS WEP key length when using static-wep security.
Syntax
wep-key-length <64|128>
• 64 - The 64 bit wep key length (with initializing vector, otherwise it is
40 bits).
ProCurve Access Point 530(wds1)# wep-key abcde
ProCurve Access Point 530(wds1)#
ProCurve Access Point 530(wds1)# wep-key-ascii
ProCurve Access Point 530(wds1)#