HP ProCurve 530 NA (J8986A)

7-50
Wireless Security Configuration
Configuring MAC Address Authentication
Web: Configuring MAC Lockout
The MAC Lockout tab shown in Figure 7-11 enables you to add devices with
selected MAC addresses to a MAC Lockout list. The MAC Lockout list applies
to all WLANs on all radios in the Access Point 530.
You can modify these parameters:
■ [Remove]: Removes the selected MAC address from the MAC Lockout
list.
■ Field entry [Add]: Adds the entered MAC address to the MAC Lockout
list.
■ [Add]: Adds the entered MAC address to MAC Lockout list.
Figure 7-11. Configuring MAC Lockout
To Configure MAC Lockout:
1. Select Special Features > MAC Lockout tab.
2. To add a MAC address to the MAC Lockout list, enter the desired MAC
address and click [Add].
3. To remove a MAC address from the MAC Lockout list, select the desired
MAC address in the MAC Lockout List and click [Remove].