HP ProCurve 530 NA (J8986A)

9-12
Command Line Reference
General Commands
Command Mode
Manager Exec
Example
This example shows how to return to the previous command levels starting
from the Interface Configuration mode and finally logging out of the CLI
session:
logout
This command terminates the CLI session.
Syntax
logout
Default Setting
N/A
Command Mode
Manager Exec
Example
ping
This command sends ICMP echo request packets to another node on the
network.
Syntax
ping <hostname | ip>
• hostname - Alias of the host.
• ip - IP address of the host.
ProCurve Access Point 530(ethernet)# exit
ProCurve Access Point 530(config)# exit
ProCurve Access Point 530# exit
Connection to host lost.
ProCurve Access Point 530# logout
Connection to host is lost.