HP ProCurve 530 NA (J8986A)

9-158
Command Line Reference
Wireless Distribution System (WDS)
Example
disable (wds)
This command disables the WDS link.
Syntax
disable
Default Setting
Disabled
Command Mode
WDS Interface Configuration
Example
enable (wds)
This command enables the WDS link.
Syntax
enable
Default Setting
Disabled
Command Mode
WDS Interface Configuration
ProCurve Access Point 530# configure
ProCurve Access Point 530(config)# interface wds1
ProCurve Access Point 530(wds1)# description WDSEXAMPLE
ProCurve Access Point 530(wds1)#
ProCurve Access Point 530# configure
ProCurve Access Point 530(config)# interface wds1
ProCurve Access Point 530(wds1)# disable
ProCurve Access Point 530(wds1)#