HP ProCurve 530 NA (J8986A)

9-91
Command Line Reference
Ethernet Interface Commands
Command Mode
Global Configuration
Example:
enable (ethernet)
This command enables the specified interface.
Syntax
enable
Default Setting
N/A
Command Mode
Ethernet Interface Configuration
Example:
disable (ethernet)
This command disables the specified interface.
Syntax
disable
Default Setting
N/A
Command Mode
Ethernet Interface Configuration
ProCurve Access Point 530(config)# interface ethernet
ProCurve Access Point 530(ethernet)#
ProCurve Access Point 530(config)# interface ethernet
ProCurve Access Point 530(ethernet)# enable
ProCurve Access Point 530(ethernet)#