HP ProCurve 530 NA (J8986A)

9-16
Command Line Reference
System Management Commands
terminal
This command sets terminal line parameters.
Syntax
terminal length | width
• length - Set number of lines on a screen.
– <2-1000> - Number of lines on a screen.
• width - Set width of display terminal.
– <61-1920> - Number of characters on a screen line.
Default Setting
N/A
Command Mode
Manager Exec
Example
System Management Commands
These commands are used to configure the user name, password, system
details, and a variety of other system information.
ProCurve Access Point 530# terminal length 1000
ProCurve Access Point 530#
ProCurve Access Point 530# terminal width 1900
ProCurve Access Point 530#
Command Function Mode Page
country
<country code>
Set the country code for the access point. GC
9-17
hostname <hostname> Specifies the hostname for the access point. GC
9-19
[no] domain <domain> Specifies the system domain name suffix for the
access point.
GC
9-20
password manager
<password>
Specifies the administrator password for
management access
MC
9-21