9-15
Command Line Reference
General Commands
• logging - Shows all the entries in the event log. See “show logging” on
page 9-32.
• mac-auth-local - Show all the entries in the local MAC address authen-
tication control lists. See “show mac-auth-local” on page 9-74.
• qos - Shows QoS details on this device and wireless system. See “show
qos” on page 9-154.
• radios - Shows information about the radio(s) on this device. See “show
radio” on page 9-116.
• radius-local - Shows status of the internal RADIUS server on device. See
“show radius-local” on page 9-70.
• running-config - Shows the running configuration file of this device. See
“show running-config” on page 9-60.
• snmp-server - Shows SNMP community and trap information. See “show
snmp-server” on page 9-45.
• sntp - Shows configured time protocol and servers on this device. See
“show sntp” on page 9-35.
• ssh - Shows SSH configuration and the status of active connections.
See “show ssh” on page 9-26.
• ssid - Shows SSID information on this device or radio context. See
“show ssid” on page 9-117.
• stations - Show associated wireless station details. See “show stations” on
page 9-122.
• supported-rate - Show information about supported transmission rates
on this device. See “show supported-rate” on page 9-123.
• system-information - Show global configured and operational system
parameters on this device. See “show system-information” on page 9-27.
• tech - Shows status of a predefined command sequence used by
technical support. See “show tech” on page 9-57.
• time - Show current date and time. See “show time” on page 9-35.
• version - Show software version. See “show version” on page 9-29.
• wlans - Show WLANs information on this device or radio context. See
“show wlan” on page 9-119.
• wds - Show information about the WDS's on this device. See “show wds”
on page 9-160.
To Next Page
Loading...
