9-78
Command Line Reference
Client/Station Deauthentication
Client/Station Deauthentication
Use this command to deauthenticate a device.
deauth-mac
This command deauthenticates a device from the access point.
Syntax
deauth-mac <mac address>
• mac address - Specifies the MAC Address to deauthenticate. Valid
format is 00:00:00:00:00:00 - FF:FF:FF:FF:FF:FF.
Default
None
Command Mode
Global Configuration
Example
Command Function Mode Page
deauth-mac <mac
address>
Deauthenticates the specified MAC address from the
device.
GC 9-78
ProCurve Access Point 530# deauth-mac 00:d0:59:c8:62:dd
ProCurve Access Point 530#
To Next Page
Loading...
