9-76
Command Line Reference
MAC Lockout
show lockout-mac
This command displays all entries in the MAC Lockout list on the device.
Syntax
show lockout-mac
Default
None
Command Mode
Manager Exec
Example
lockout-mac clear
This command adds or removes entries in the MAC Lockout list on the device.
Syntax
lockout-mac clear <mac address> | all
• mac address - Specifies an entry in the MAC Lockout list. Valid format
is 00:00:00:00:00:00 - FF:FF:FF:FF:FF:FF.
• all - Clears all addresses from the MAC Lockout list.
Default
None
Command Mode
Global Configuration
ProCurve Access Point 530# show lockout-mac
Locked out addresses
00:14:C2:A5:09:8D
0A:16:D2:5A:23:78
Number of locked out MAC addresses = 2
ProCurve Access Point 530#
To Next Page
Loading...
