HP ProCurve 530 NA (J8986A)

9-88
Command Line Reference
Filtering Commands
inter-station-blocking
This command enables inter station blocking on the device. The no version of
the command disables inter station blocking on the device.
Syntax
inter-station-blocking
no inter-station-blocking
Default
Disabled
Command Mode
Global Configuration
Example
wireless-mgmt-block
This command enables access to the management interfaces (http/telnet/etc.)
from the wireless side on the device. The no version of the command disables
this ability on the device.
Syntax
wireless-mgmt-block
no wireless-mgmt-block
Default
Disabled.
Command Mode
Global Configuration
Manager Exec
Example
ProCurve Access Point 530# configure
ProCurve Access Point 530(config)# inter-station-blocking
ProCurve Access Point 530(config)#