7-15
Wireless Security Configuration
Wireless Security Overview
Table 7-3. Summary of MAC Authentication Configuration
Configuring MAC Authentication in the HP ProCurve Wireless Access Point 530
MAC
Authentication
Mode
MAC
Authentication
Local MAC
Authentication
MAC Authentication Table RADIUS Comments
MAC Address Permission
MAC Table
Permission
Active Inactive
Local MAC
authentication
Local MAC Deny xx:xx:xx:xx:xx:xx * Not
needed
All MAC addresses
allowed except for entries
set to active in the MAC
Authentication Table. Can
be combined with other
methods for improved
security.
Local MAC
authentication
Local MAC Allow xx:xx:xx:xx:xx:xx * Not
needed
All MAC addresses denied
except for entries set to
active in MAC
Authentication Table. Can
be combined with other
methods for improved
security.
Remote MAC
authentication
RADIUS MAC MAC address
permission policy
based on RADIUS
server
configuration.
RADIUS server:
Use PAP authentication
and enter MAC address
as specified by the
Radius MAC Address
Format. User and
password on the
RADIUS server must be
the same.
Required Works with static and
dynamic WEP keys. Does
not work with WPA,
802.1X, or WPA-PSK.
To Next Page
Loading...
