HP ProCurve 530 NA (J8986A)

7-42
Wireless Security Configuration
Configuring RADIUS Client Authentication
The following example first sets the radius-local username to “chris” and
subsequently sets the password for the chris user account to “chrisopen”.
To display the current local RADIUS servers from the Manager Exec level, use
the show radius-local command, as shown in the following example.
ProCurve Access Point 530# configure
ProCurve Access Point 530(config)# radius-local chris
realname csmith
ProCurve Access Point 530(config)# radius-local chris
password chrisopen
ProCurve Access Point 530(config)#
ProCurve Access Point 530# config
ProCurve Access Point 530(config)# show radius-local
Local-Radius User Accounts (wireless client authentication:
Username Real Name Status
---------- ---------- ----------
chris csmith Enabled
ProCurve Access Point 530(config)#