HP ProCurve 530 NA (J8986A) User Manual

8-32
Special Features
AP Detection Commands
Figure 8-11. AP Detection - Settings Tab
To Enable AP Detection Parameters:
1. Select Special Features > AP Detection and click the Settings tab.
2. To enable scanning, select Enable from the AP Detection drop-down for the
radio you are configuring.
3. To specify the beacon transmission interval, enter the interval value in the
Scan Interval field.
4. To specify the duration of scanning, enter the duration value in the Scan
Duration field.
5. Select [Update] to save the settings.

HP ProCurve 530 NA (J8986A) Specifications

General

Brand	HP
Model	ProCurve 530 NA (J8986A)
Category	Wireless Access Point
Language	English