9
Field Description
ETH send packet statistics
Statistics about the Ethernet packets sent by the Ethernet module:
• L3OutNum—Number of packets sent out of Layer 3 Ethernet interfaces.
• VLANOutNum—Number of packets sent out of VLAN interfaces.
• FastOutNum—Number of packets fast forwarded.
• L2OutNum—Number of packets sent out of Layer 2 Ethernet interfaces.
• MbufRelayNum—Number of packets transparently sent.
ETH send error statistics
Statistics about the error Ethernet packets in the outbound direction on the
Ethernet module:
• NullMbuf—Number of packets with null pointers.
• ErrAdjFwd—Number of packets with adjacency table errors.
• ErrPrepend—Number of packets with extension errors.
• ErrHdrLen—Number of packets with header length errors.
• ErrPad—Number of packets with padding errors.
• ErrQoSTrs—Number of packets that failed to be sent by QoS.
• ErrVLANTrs—Number of packets that failed to be sent in VLANs.
• ErrEncap—Number of packets that failed to be sent due to link header
encapsulation failures.
• ErrTagVLAN—Number of packets that failed to be sent due to VLAN tag
encapsulation failures.
• IfShut—Number of packets that are being sent when the interface is shut
down.
• IfErr—Number of packets with incorrect outgoing interfaces.
Related commands
reset ethernet statistics
display interface
Use display interface to display interface information.
Syntax
display interface [ interface-type [ interface-number ] ] [ brief
[ description | down ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-type: Specifies an interface type.
interface-number: Specifies an interface number.
brief: Displays brief interface information. If you do not specify this keyword, the command
displays detailed interface information.
description: Displays complete interface descriptions. If you do not specify this keyword, the
command displays only the first 27 characters of each interface description.
To Next Page
Loading...
Need help?
General