HPE FlexNetwork 5130 EI Series User Manual

234
MVRP commands
display mvrp running-status
Use display mvrp running-status to display MVRP running status.
Syntax
display mvrp running-status [ interface interface-list ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-list: Specifies a range of Ethernet interfaces in the form of
interface-type interface-number1 [ to interface-type interface-number2 ].
The
interface-type interface-number argument represents the interface type and
interface number. The value for the
interface-number2 argument must be greater than or equal
to the value for the
interface-number1 argument. If the specified interfaces are not enabled
with MVRP, this command displays global MVRP information. If you do not specify this option, the
command displays global MVRP information and MVRP running status for all MVRP-enabled ports.
Examples
# Display global MVRP information and MVRP running status for all MVRP-enabled ports.
<Sysname> display mvrp running-status
-------[MVRP Global Info]-------
Global Status : Enabled
Compliance-GVRP : False
----[GigabitEthernet1/0/1]----
Config Status : Enabled
Running Status : Enabled
Join Timer : 20 (centiseconds)
Leave Timer : 60 (centiseconds)
Periodic Timer : 100 (centiseconds)
LeaveAll Timer : 1000 (centiseconds)
Registration Type : Normal
Registered VLANs :
1(default), 2-10
Declared VLANs :
1(default), 2-10
Propagated VLANs :
1(default), 2-10
----[GigabitEthernet1/0/2]----
Config Status : Enabled

HPE FlexNetwork 5130 EI Series Specifications

General

Brand	HPE
Model	FlexNetwork 5130 EI Series
Category	Switch
Language	English