127
Syntax
region-name name
undo region-name
Default
The MST region name of the device is its MAC address.
Views
MST region view
Predefined user roles
network-admin
Parameters
name: Specifies the MST region name, a string of 1 to 32 characters.
Usage guidelines
The MST region name, the VLAN-to-instance mapping table, and the MSTP revision level of a
device determine the device's MST region.
After configuring this command, execute the
active region-configuration command to
activate the configured MST region name.
Examples
# Set the MST region name of the device to hello.
<Sysname> system-view
[Sysname] stp region-configuration
[Sysname-mst-region] region-name hello
Related commands
active region-configuration
check region-configuration
display stp region-configuration
instance
revision-level
vlan-mapping modulo
reset stp
Use reset stp to clear the spanning tree statistics.
Syntax
reset stp [ interface interface-list ]
Views
User view
Predefined user roles
network-admin
To Next Page
Loading...
Need help?
General