HPE FlexNetwork 5130 EI Series User Manual

204
Super VLAN commands
display supervlan
Use display supervlan to display information about super VLANs and their associated
sub-VLANs.
Syntax
display supervlan [ supervlan-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
supervlan-id: Specifies a super VLAN ID in the range of 1 to 4094. If you do not specify a super
VLAN ID, this command displays information about all super VLANs and their associated
sub-VLANs.
Examples
# Display information about super VLAN 2 and its associated sub-VLANs.
<Sysname> display supervlan 2
Super VLAN ID: 2
Sub-VLAN ID: 3-5
VLAN ID: 2
VLAN type: Static
It is a super VLAN.
Route interface: Configured
IPv4 address: 10.153.17.41
IPv4 subnet mask: 255.255.252.0
IPv6 global unicast addresses:
2001::1, subnet is 2001::/64 [TENTATIVE]
Description: VLAN 0002
Name: VLAN 0002
Tagged ports: None
Untagged ports: None
VLAN ID: 3
VLAN type: Static
It is a sub VLAN.
Route interface: Configured
IPv4 address: 10.153.17.41
IPv4 subnet mask: 255.255.252.0
IPv6 global unicast addresses:
2001::1, subnet is 2001::/64 [TENTATIVE]

HPE FlexNetwork 5130 EI Series Specifications

General

Brand	HPE
Model	FlexNetwork 5130 EI Series
Category	Switch
Language	English