242
mvrp enable
Use mvrp enable to enable MVRP on a port.
Use
undo mvrp enable to disable MVRP on a port.
Syntax
mvrp enable
undo mvrp enable
Default
MVRP is disabled on a port.
Views
Layer 2 Ethernet interface view
Layer 2 aggregate interface view
Predefined user roles
network-admin
Usage guidelines
For MVRP to take effect on a port, make sure the following requirements are met:
• MVRP is enabled both globally and on the port.
• The port is physically up.
• The port link type is trunk.
• The port is not a member of an aggregation group.
Examples
# Enable MVRP on GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] mvrp global enable
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] port link-type trunk
[Sysname-GigabitEthernet1/0/1] mvrp enable
Related commands
display mvrp running-status
mvrp global enable
Use mvrp global enable to enable MVRP globally.
Use
undo mvrp global enable to disable MVRP globally.
Syntax
mvrp global enable
undo mvrp global enable
Default
MVRP is disabled globally.
To Next Page
Loading...
Need help?
General