HPE FlexNetwork 5130 EI Series - VLAN Mapping Commands; Displaying VLAN Mapping Information

243
Views
System view
Predefined user roles
network-admin
Usage guidelines
For MVRP to take effect on a port, enable MVRP both on the port and globally.
Disabling MVRP globally also disables MVRP on all ports.
Examples
# Enable MVRP globally.
<Sysname> system-view
[Sysname] mvrp global enable
Related commands
display mvrp running-status
mvrp gvrp-compliance enable
Use mvrp gvrp-compliance enable to enable GVRP compatibility for MVRP.
Use
undo mvrp gvrp-compliance enable to restore the default.
Syntax
mvrp gvrp-compliance enable
undo mvrp gvrp-compliance enable
Default
MVRP is incompatible with GVRP.
Views
System view
Predefined user roles
network-admin
Usage guidelines
When you enable GVRP compatibility for MVRP, the device can receive and send both MVRP and
GVRP frames.
Examples
# Enable GVRP compatibility for MVRP.
<Sysname> system-view
[Sysname] mvrp gvrp-compliance enable
Related commands
display mvrp running-status
mvrp registration
Use mvrp registration to set the MVRP registration mode on a port.
Use
undo mvrp registration to restore the default.