HPE FlexNetwork 5130 EI Series User Manual

201
Examples
# Assign ARP packets in Ethernet II encapsulation and IPv4 packets to VLAN 3 for transmission.
(The protocol type ID for ARP is 0806 in hexadecimal notation.)
<Sysname> system-view
[Sysname] vlan 3
[Sysname-vlan3] protocol-vlan 1 ipv4
[Sysname-vlan3] protocol-vlan 2 mode ethernetii etype 0806
Related commands
display protocol-vlan interface
display protocol-vlan vlan
port protocol-vlan
VLAN group commands
display vlan-group
Use display vlan-group to display VLAN group information.
Syntax
display vlan-group [ group-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
group-name: Specifies a VLAN group by its name, a case-sensitive string of 1 to 31 characters.
The first character must be an alphabetical character. If you do not specify this argument, the
command displays information about all VLAN groups.
Examples
# Display information about VLAN group test001.
<Sysname> display vlan-group test001
VLAN group: test001
VLAN list: 2-4 100 200
# Display information about all VLAN groups.
<Sysname> display vlan-group
VLAN group: test001
VLAN list: 2-4 100 200
VLAN group: rnd
VLAN list: Null
Table 44 Command output
Field Description
VLAN group Name of the VLAN group.

HPE FlexNetwork 5130 EI Series Specifications

General

Brand	HPE
Model	FlexNetwork 5130 EI Series
Category	Switch
Language	English