HPE FlexNetwork 5130 EI Series User Manual

235
Running Status : Disabled
Join Timer : 20 (centiseconds)
Leave Timer : 60 (centiseconds)
Periodic Timer : 100 (centiseconds)
LeaveAll Timer : 1000 (centiseconds)
Registration Type : Normal
Registered VLANs :
None
Declared VLANs :
None
Propagated VLANs :
None
Table 50 Command output
Field Description
MVRP Global Info Global MVRP information.
Global Status
Global MVRP status:
• Enabled.
• Disabled.
Compliance-GVRP
GVRP compatibility status:
• True—Compatible.
• False—Incompatible.
Config Status
Whether MVRP is enabled on the port:
• Enabled.
• Disabled.
Running Status
Whether MVRP takes effect on the port:
• Enabled—MVRP takes effect on the port.
• Disabled—MVRP does not take effect on the port.
Whether MVRP takes effect on a port is determined by the
following items:
• Global and port-specific MVRP enabling status.
• Physical link state of the port.
• Port link type.
• Whether the port is a member of an aggregation group.
Registration Type
MVRP registration mode:
• Normal.
• Fixed.
• Forbidden.
Registered VLANs VLANs that the port has registered.
Declared VLANs VLANs that the port has declared to its peer participant.
Propagated VLANs
VLANs that the port has learned and notified other participants on
the same device to declare to their respective peer participants.
display mvrp state
Use display mvrp state to display the MVRP state of a port in a VLAN.

HPE FlexNetwork 5130 EI Series Specifications

General

Brand	HPE
Model	FlexNetwork 5130 EI Series
Category	Switch
Language	English