HPE FlexNetwork 5130 EI Series User Manual

123
display stp region-configuration
Use display stp region-configuration to display effective MST region configuration.
Syntax
display stp region-configuration
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# In MSTP mode, display effective MST region configuration.
<Sysname> display stp region-configuration
Oper Configuration
Format selector : 0
Region name : hello
Revision level : 0
Configuration digest : 0x5f762d9a46311effb7a488a3267fca9f
Instance VLANs Mapped
0 21 to 4094
1 1 to 10
2 11 to 20
Table 31 Command output
Field Description
Format selector
Format selector that is defined by the spanning tree protocol. The default
value is 0, and the selector cannot be configured.
Region name MST region name.
Revision level
Revision level of the MST region. The default value is 0, and the level can be
configured by using the
revision-level
command.
VLANs Mapped VLANs mapped to the MSTI.
Related commands
instance
region-name
revision-level
vlan-mapping modulo
display stp root
Use display stp root to display the root bridge information of spanning trees.

HPE FlexNetwork 5130 EI Series Specifications

General

Brand	HPE
Model	FlexNetwork 5130 EI Series
Category	Switch
Language	English