HPE FlexNetwork 5130 EI Series User Manual

4
Usage guidelines
CAUTION:
The
default command might interrupt ongoing network services. Make sure you are fully aware
of the impacts of this command when you use it in a live network.
This command might fail to restore the default settings for some commands because of command
dependencies or system restrictions. You can use the
display this command in interface view to
identify these commands, and use their
undo forms or follow the command reference to restore their
default settings. If your restoration attempt still fails, follow the error message instructions to solve
the problem.
Examples
# Restore the default settings for GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] default
description
Use description to configure the description of an interface.
Use
undo description to restore the default.
Syntax
description text
undo description
Default
The description of an interface is the interface name plus Interface (for example,
GigabitEthernet1/0/1 Interface).
Views
Ethernet interface view
Predefined user roles
network-admin
Parameters
text: Specifies the interface description, a case-sensitive string of 1 to 255 characters.
Examples
# Set the description of GigabitEthernet 1/0/1 to lan-interface.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] description lan-interface
display counters
Use display counters to display interface traffic statistics.
Syntax
display counters { inbound | outbound } interface [ interface-type
[ interface-number ] ]

HPE FlexNetwork 5130 EI Series Specifications

General

Brand	HPE
Model	FlexNetwork 5130 EI Series
Category	Switch
Language	English