247
Related commands
qinq enable
qinq enable
Use qinq enable to enable QinQ on an interface.
Use
undo qinq enable to disable QinQ on an interface.
Syntax
qinq enable
undo qinq enable
Default
QinQ is disabled on interfaces.
Views
Layer 2 Ethernet interface view
Layer 2 aggregate interface view
Predefined user roles
network-admin
Examples
# Enable QinQ on GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] qinq enable
Related commands
display qinq
qinq ethernet-type (interface view)
Use qinq ethernet-type to set the TPID value in SVLAN tags on an interface.
Use
undo qinq ethernet-type to restore the default TPID value in SVLAN tags on an
interface.
Syntax
qinq ethernet-type service-tag hex-value
undo qinq ethernet-type service-tag
Default
The TPID value in SVLAN tags is 8100 in hexadecimal notation.
Views
Layer 2 Ethernet interface view
Layer 2 aggregate interface view
Predefined user roles
network-admin
To Next Page
Loading...
Need help?
General