HPE FlexNetwork 5130 EI Series User Manual

58
Predefined user roles
network-admin
network-operator
Examples
# Display the aging timer for dynamic MAC address entries.
<Sysname> display mac-address aging-time
MAC address aging time: 300s.
Related commands
mac-address timer
display mac-address mac-learning
Use display mac-address mac-learning to display the global MAC address learning status
and the MAC learning status of the specified interface or all interfaces.
Syntax
display mac-address mac-learning [ interface interface-type
interface
-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Specifies an interface by its type and
number. If you do not specify an interface, the command displays the global MAC address learning
status and the MAC address learning status of all interfaces.
Examples
# Display the global MAC address learning status and the MAC learning status of all interfaces.
<Sysname> display mac-address mac-learning
Global MAC address learning status: Enabled.
Port Learning Status
GE1/0/1 Enabled
GE1/0/2 Enabled
Table 14 Command output
Field Description
Global MAC address learning status
Global MAC address learning status:
• Enabled.
• Disabled.
Learning Status
MAC address learning status of an interface:
• Enabled.
• Disabled.

HPE FlexNetwork 5130 EI Series Specifications

General

Brand	HPE
Model	FlexNetwork 5130 EI Series
Category	Switch
Language	English