249
Default
The TPID value in CVLAN tags is 8100 in hexadecimal notation.
Views
System view
Predefined user roles
network-admin
Parameters
customer-tag: Sets the TPID value in the CVLAN tag.
hex-value
: Sets a hexadecimal TPID value in the range of 1 to ffff, excluding the reserved
EtherType values listed in Table 54.
Table 54
Reserved EtherType values
Protocol type Value
ARP 0x0806
PUP 0x0200
RARP 0x8035
IP 0x0800
IPv6 0x86dd
PPPoE 0x8863/0x8864
MPLS 0x8847/0x8848
IPX/SPX 0x8137
IS-IS 0x8000
LACP 0x8809
LLDP 0x88cc
802.1X 0x888e
802.1ag 0x8902
Cluster 0x88a7
Reserved 0xfffd/0xfffe/0xffff
Examples
# Set the TPID value in CVLAN tags to 8200 (hexadecimal).
<Sysname> system-view
[Sysname] qinq ethernet-type customer-tag 8200
Related commands
qinq ethernet-type (interface view)
qinq transparent-vlan
Use qinq transparent-vlan to enable transparent transmission for a list of VLANs on a port.
Use
undo qinq transparent-vlan to disable transparent transmission for a list of VLANs on
a port.
To Next Page
Loading...
Need help?
General