HPE FlexNetwork 5130 EI Series User Manual

212
port private-vlan trunk secondary
private-vlan (VLAN view)
private-vlan primary
port private-vlan promiscuous
Use port private-vlan promiscuous to configure a port as a promiscuous port of the
specified VLAN and assign the port to the VLAN.
Use
undo port private-vlan to restore the default.
Syntax
port private-vlan vlan-id promiscuous
undo port private-vlan
Default
A port is not a promiscuous port of any VLANs.
Views
Layer 2 Ethernet interface view
Layer 2 aggregate interface view
Predefined user roles
network-admin
Parameters
vlan-id: Specifies a VLAN ID in the range of 1 to 4094. Though VLAN 1 is in the valid value range,
it cannot be configured in the command.
Usage guidelines
If the specified VLAN is a primary VLAN that has been associated with secondary VLANs, the
command assigns the port to the associated secondary VLANs. Also, the following events occur:
• For an access port, the device performs the following operations:
{ Changes the port link type to hybrid.
{ Configures the primary VLAN as the PVID.
{ Assigns the port to the primary VLAN and its associated secondary VLANs as an untagged
member.
• For a trunk port, the device does not change the port link type or PVID.
• For a hybrid port, the device does not change the port link type or PVID.
{ If the hybrid port has been a tagged or untagged member of the primary VLAN and part of its
associated secondary VLANs, this member attribute remains in these VLANs. The device
assigns the hybrid port to the rest of the associated secondary VLANs as an untagged
member.
{ If the hybrid port does not allow any of the primary VLAN and its associated secondary
VLANs, the command assigns the port to these VLANs as an untagged member.
If you execute this command on a promiscuous port multiple times, the most recent configuration
takes effect.
The
undo port private-vlan command does not change the VLAN attributes (allowed
secondary VLANs, link type, and PVID) of the port. When you execute the
undo port
private-vlan
command on a promiscuous port of a VLAN, the command removes the port from
the VLAN.

HPE FlexNetwork 5130 EI Series Specifications

General

Brand	HPE
Model	FlexNetwork 5130 EI Series
Category	Switch
Language	English