HPE FlexNetwork 5130 EI Series User Manual

79
This command might fail to restore the default settings for some commands for reasons such as
command dependencies and system restrictions. Use the
display this command in interface
view to identify these commands, and then use their
undo forms or follow the command reference to
restore their default settings. If your restoration attempt still fails, follow the error message
instructions to resolve the problem.
Examples
# Restore the default settings for Layer 2 aggregate interface 1.
<Sysname> system-view
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] default
description
Use description to configure the description of an interface.
Use
undo description to restore the default.
Syntax
description text
undo description
Default
The description of an interface is interface-name Interface. For example, the default
description of Bridge-Aggregation 1 is
Bridge-Aggregation1 Interface.
Views
Layer 2 aggregate interface view
Predefined user roles
network-admin
Parameters
text: Specifies a description, a case-sensitive string of 1 to 255 characters.
Examples
# Configure the description as connect to the lab for Layer 2 aggregate interface
Bridge-Aggregation 1.
<Sysname> system-view
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] description connect to the lab
display interface
Use display interface to display aggregate interface information.
Syntax
display interface [ bridge-aggregation [ interface-number ] ] [ brief
[ description | down ] ]
Views
Any view

HPE FlexNetwork 5130 EI Series Specifications

General

Brand	HPE
Model	FlexNetwork 5130 EI Series
Category	Switch
Language	English