87
display link-aggregation summary
Use display link-aggregation summary to display brief information about all aggregation
groups.
Syntax
display link-aggregation summary
Views
Any view
Predefined user roles
network-admin
network-operator
Usage guidelines
Static link aggregation groups cannot obtain information about the peer groups. As a result, the
Partner ID field displays None for a static link aggregation group.
Examples
# Display brief information about all aggregation groups.
<Sysname> display link-aggregation summary
Aggregate Interface Type:
BAGG -- Bridge-Aggregation, BLAGG –- Blade-Aggregation, RAGG -- Route-Aggregation, SCH-B
– Schannel-Bundle
Aggregation Mode: S -- Static, D -- Dynamic
Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing
Actor System ID: 0x8000, 000f-e267-6c6a
AGG AGG Partner ID Selected Unselected Individual Share
Interface Mode Ports Ports Ports Type
--------------------------------------------------------------------------------
BAGG20 D 0x8000,00e0-fcff-ff01 2 0 0 Shar
Table 21 Command output
Field Description
Aggregate Interface Type
Aggregate interface type:
• BAGG—Layer 2.
• RAGG—Layer 3.
• SCH-B—S-channel bundle.
Aggregation Mode
Aggregation group type:
• S—Static.
• D—Dynamic.
Loadsharing Type
Load sharing type:
• Shar—Load-sharing.
• NonS—Non-load-sharing.
Actor System ID
Local system ID, which contains the local system LACP priority and the local
system MAC address.
AGG Interface Type and number of the aggregate interface.
AGG Mode Aggregation group type.
To Next Page
Loading...
Need help?
General