HPE FlexNetwork 5130 EI Series User Manual

104
<Sysname> reset counters interface bridge-aggregation 1
reset lacp statistics
Use reset lacp statistics to clear LACP statistics for the specified link aggregation member
ports.
Syntax
reset lacp statistics [ interface interface-list ]
Views
User view
Predefined user roles
network-admin
Parameters
interface interface-list: Specifies a list of link aggregation member ports, in the format
interface-type interface-number1 [ to interface-type interface-number2 ].
The value for the
interface-number1 argument must be equal to or greater than the value for
the
interface-number2 argument. If you do not specify any member ports, the command clears
LACP statistics for all member ports.
Examples
# Clear LACP statistics for all link aggregation member ports.
<Sysname> reset lacp statistics
Related commands
display link-aggregation member-port
shutdown
Use shutdown to shut down an aggregate interface.
Use
undo shutdown to bring up an aggregate interface.
Syntax
shutdown
undo shutdown
Default
The default for this command varies by device model.
Views
Layer 2 aggregate interface view
Predefined user roles
network-admin
Examples
# Bring up Layer 2 aggregate interface Bridge-Aggregation 1.
<Sysname> system-view
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] undo shutdown

HPE FlexNetwork 5130 EI Series Specifications

General

Brand	HPE
Model	FlexNetwork 5130 EI Series
Category	Switch
Language	English