HPE FlexNetwork 5130 EI Series User Manual

61
Field Description
Static Unicast Address (User-defined) Count
Number of static unicast MAC address entries added
by users.
Static Unicast Address (System-defined) Count
Number of static unicast MAC address entries added
by the system.
Total Unicast MAC Addresses In Use Number of unicast MAC address entries.
Total Unicast MAC Addresses Available
Maximum number of unicast MAC address entries
allowed.
Multicast and Multiport MAC Address Count
Number of multicast and multiport unicast MAC
address entries.
Static Multicast and Multiport MAC Address
(User-defined) Count
Number of static multicast and multiport unicast MAC
address entries added by users.
Total Multicast and Multiport MAC Addresses
Available
Maximum number of multicast and multiport unicast
MAC address entries allowed.
mac-address (interface view)
Use mac-address to add or modify a MAC address entry on an interface.
Use
undo mac-address to delete a MAC address entry on an interface.
Syntax
mac-address { dynamic | multiport | static } mac-address vlan vlan-id
undo mac-address
{ dynamic | multiport | static } mac-address vlan vlan-id
Default
An interface is not configured with MAC address entries.
Views
Layer 2 Ethernet interface view
Layer 2 aggregate interface view
Predefined user roles
network-admin
Parameters
dynamic: Specifies dynamic MAC address entries.
static: Specifies static MAC address entries.
multiport: Specifies multiport unicast MAC address entries. A frame whose destination MAC
address matches a multiport unicast MAC address entry is sent out of multiple ports.
mac-address: Specifies a MAC address in the format of H-H-H, excluding multicast, all-zero, and
all-F MAC addresses. When entering a MAC address, you can omit the leading zeros in each H
section. For example, enter f-e2-1 for 000f-00e2-0001.
vlan vlan-id: Specifies an existing VLAN to which the specified interface belongs. The value
range for the
vlan-id argument is 1 to 4094.
Usage guidelines
Typically, the device automatically builds the MAC address table by learning the source MAC
addresses of incoming frames on each interface. However, you can manually configure static MAC

HPE FlexNetwork 5130 EI Series Specifications

General

Brand	HPE
Model	FlexNetwork 5130 EI Series
Category	Switch
Language	English