5
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
inbound: Displays inbound traffic statistics.
outbound: Displays outbound traffic statistics.
interface-type: Specifies an interface type.
interface-number: Specifies an interface number.
Usage guidelines
This command displays traffic statistics within a statistics polling interval specified by using the
flow-interval command.
To clear the Ethernet interface traffic statistics, use the
reset counters interface command.
If you do not specify an interface type, this command displays traffic statistics for all interfaces that
have traffic counters.
If you specify an interface type but do not specify an interface number, this command displays traffic
statistics for all interfaces of the specified type.
If you specify an interface type and number, this command displays traffic statistics for the specified
interface.
Examples
# Display inbound traffic statistics for all interfaces.
<Sysname> display counters inbound interface
Interface Total (pkts) Broadcast (pkts) Multicast (pkts) Err (pkts)
GE1/0/1 100 100 0 0
GE1/0/2 Overflow Overflow Overflow Overflow
Overflow: More than 14 digits (7 digits for column "Err").
--: Not supported.
Table 1 Command output
Field Description
Interface Abbreviated interface name.
Total (pkts) Total number of packets received or sent through the interface.
Broadcast (pkts) Total number of broadcast packets received or sent through the interface.
Multicast (pkts) Total number of multicast packets received or sent through the interface.
Err (pkts) Total number of error packets received or sent through the interface.
Overflow: More than 14
digits (7 digits for column
"Err")
The command displays
Overflow
when any of the following conditions exist:
• The data length of an Err field value is greater than 7 decimal digits.
• The data length of a non-Err field value is greater than 14 decimal
digits.
--: Not supported The statistical item is not supported.
To Next Page
Loading...
Need help?
General