HPE FlexNetwork 5130 EI Series User Manual

172
<Sysname> display interface vlan-interface 2 brief
Brief information on interfaces in route mode:
Link: ADM - administratively down; Stby - standby
Protocol: (s) - spoofing
Interface Link Protocol Primary IP Description
Vlan2 DOWN DOWN --
Table 35 Command output
Field Description
Vlan-interface2 VLAN interface name.
Current state
Physical link state of the VLAN interface:
• Administratively DOWN—The interface has been shut
down by using the shutdown command.
• DOWN—The interface is administratively up, but its physical
state is down. The VLAN of this VLAN interface does not
contain any physical ports in up state. The ports might not be
connected correctly or the links might have failed.
• UP—The interface is both administratively and physically up.
Line protocol state
Data link layer state of the VLAN interface:
• DOWN—The link layer protocol state of the interface is
down.
• UP—The link layer protocol state of the interface is up.
Description Description of the VLAN interface.
Bandwidth Expected bandwidth of the VLAN interface.
Maximum transmission unit MTU of the VLAN interface.
Internet protocol processing : Disabled
The VLAN interface is not assigned an IP address and cannot
process IP packets.
Internet Address
IP address of the VLAN interface. The
primary
attribute indicates
that the address is the primary IP address.
IP packet frame type IPv4 packet framing format.
hardware address MAC address of the VLAN interface.
IPv6 packet frame type IPv6 packet framing format.
Last clearing of counters
The most recent time that the
reset counters
interface vlan-interface
command was executed.
This field displays
Never
if you have never executed this
command.
Brief information on interfaces in route
mode
Brief information about Layer 3 interfaces.
Interface Abbreviated interface name.

HPE FlexNetwork 5130 EI Series Specifications

General

Brand	HPE
Model	FlexNetwork 5130 EI Series
Category	Switch
Language	English