256
interface interface-type interface-number: Specifies a port by its type and number.
Usage guidelines
If you do not specify any keywords or arguments, the command displays all local LLDP information,
which includes the following:
• The global LLDP information.
• The LLDP information about the LLDP-enabled ports in up state.
Examples
# Display all local LLDP information.
<Sysname> display lldp local-information
Global LLDP local-information:
Chassis ID : 00e0-fc00-5600
System name : Sysname
System description : HPE Comware Platform Software, Software Version 7.1.070,
Release 3207
HPE 5130-24G-4SFP+ EI Switch
Copyright (c) 2010-2017 Hewlett Packard Enterprise Develo
pment LP
System capabilities supported : Bridge, Router, Customer Bridge, Service Bridge
System capabilities enabled : Bridge, Router, Service Bridge
MED information:
Device class : Connectivity device
MED inventory information of master board:
HardwareRev : REV.A
FirmwareRev : 109
SoftwareRev : 7.1.070 Release 3207
SerialNum : NONE
Manufacturer name : HPE
Model name : HPE 5130-24G-4SFP+ EI Switch
Asset tracking identifier : Unknown
LLDP local-information of port 52[GigabitEthernet1/0/3]:
Port ID type : Interface name
Port ID : GigabitEthernet1/0/3
Port description : GigabitEthernet1/0/3 Interface
LLDP agent nearest-bridge management address:
Management address type : IPv4
Management address : 192.168.80.60
Management address interface type : IfIndex
Management address interface ID : Unknown
Management address OID : 0
LLDP agent nearest-nontpmr management address:
Management address type : IPv4
Management address : 192.168.80.61
Management address interface type : IfIndex
Management address interface ID : Unknown
Management address OID : 0
LLDP agent nearest-customer management address:
To Next Page
Loading...
