17-19 Operators’ Manual
990400 Rev C 2010 May 1
10-2
• DICOM Database Root Folder - contains patient data that
is required for creating DICOM images.
• DICOM Export Destination Folder – this path selection
determines where the DICOM images are to reside when
executing the Export DICOM procedure.
2. Click Browse for each field.
3. Choose a path for the DICOM Database Root Folder and the
DICOM Export Destination Folder.
If required, click Make New Folder.
4. Click OK.
Fast System
For Networked Environments only where multiple computers are
sharing the database, if appropriate, check the Fast System
checkbox. This identifies the current computer as one of the fast
machines on the network, which gives it preference to be chosen as
master.
Rescan
The Rescan option is used to request a rescan of the entire patient/
study list database. Rescan rebuilds the patient/study list if it is
suspected that the list is corrupted. A database Rescan can run in the
background.
A Rescan can be a time-consuming operation, depending on the
size of the database.
To initiate a rescan:
1. Select Tools > Setup.
2. Click Rescan button. A dialog is displayed stating: “Patient List
Rescan is now in progress and will continue until completion.
You may continue working.” Click OK. A Rescan can not be
cancelled.
To Next Page
Loading...