Imaging Sciences i-Cat 17-19 - Accessing I-CAT DICOM Data

990400 Rev C 2010 May 1
iCATVision & iCATTransfer
A-7
3. Under Image Root Folder (Primary Destination), Browse to
iCATVision Root folder and select. (This is most likely on a
server/central storage location).
4. Click Start. This saves the preset Watch and Root destinations.
NOTE: If START is not clicked the transfer program will not work.
Remember, iCATTransfer must be running in order for the data to
transfer (iCATTranfer can be minimized).
Accessing i-CAT
®
DICOM Data
iCATTransfer requires data to be exported from the iCAT
®
software
in DICOM3 format.