990400 Rev C 2010 May 1
Reconstruction of Anatomy
8-23
If a workup was made or changed and an attempt is made to
close the Vision software or switch to a different Patient, the
following dialog box appears.
To save the changes made, click Yes. The Select a Workup dialog
box appears. Continue the save procedure as described above.
Load an Existing Workup
To load an existing workup for a
Patient with multiple workups:
1. Right-click any image on
Preview screen and select
Load Different Workup.
2. Double-click Workup Name. The dialog box closes and the
existing workup is loaded.
To Next Page
Loading...