990400 Rev C 2010 May 1
Reconstruction of Anatomy
8-3
Patient Detail View shows detailed Patient data, including
acquisition details for the currently selected Patient workup that is
highlighted in the Patients in Database list.
Panoramic View shows a wide detail view of the selected points on
the Axial View. Distance and Hounsfield Unit measurements can be
taken on this view. Double-clicking the Panoramic View brings up
the Implant Planning Screen.
Sagittal View displays the Maxilla and Mandible contour lines.
Distance and Hounsfield Unit measurements can be taken on this
view. Double-clicking on the Sagittal View brings up the Ceph
Screen.
Coronal View also displays the Maxilla and Mandible contour
lines. Distance and Hounsfield Unit measurements can be taken on
this view. Double-clicking on the Coronal View brings up the MPR
Screen.
Axial View controls the image displayed in the Panoramic View.
Distance and Hounsfield Unit measurements are taken on this view.
Double-clicking the Axial View brings up the TMJ Screen.
See the remainder of this chapter for details on taking
measurements, modifying the displayed information, and changing
filter settings etc.
Using Quality Control Frames
QC frames can be used to help detect patient movement during a
scan.
To use QC Frames:
1. With a study selected, click QC Frames on the Patient Detail
view. The first image of the selected scan is displayed.
To Next Page
Loading...