990400 Rev C 2010 May 1
Tools
10-17
Modify Existing Report
This function is used to edit reports that were previously created.
1. From the Main menu, select Tools > Create Report.
2. Click Modify Existing Report from the box.
3. The Load Preview box is displayed. Select the Patient Report to
modify and click Load.
The Patient Report is displayed.
4. Edit the report and select File > Save Report.
5. Click the X (upper right corner) to close Patient Report.
Start External Applications
The following external applications can be launched from the Tools
menu for a loaded study if the supported versions of these
applications are installed:
• Dolphin 3D
• 3DMD
• InVivoDental
• TxStudio (Standalone Vision Only)
A confirmation dialog is displayed informing that Vision will
terminate and the external application will start.
To open a study for a selected patient using InVivoDental or
TxStudio without first loading it, right-click on the study in the
Study List and select the appropriate option from the menu.
NOTE: In Standalone Vision, menu options for InVivoDental and
TxStudio will only appear if these applications are installed on the
workstation.
3DVR is a standalone program that comes with Vision, but runs
independently. Launching 3DVR will not terminate Vision. See
Three Dimensional Volume Rendering (3DVR) for more information.
To Next Page
Loading...