17-19 Operators’ Manual
990400 Rev C 2010 May 1
7-6
8. The scan is ported to the Vision preview screen for anatomy
reconstruction (shown below).
Dose Area Product Feature
The Dose Area Product (DAP) feature requires a license for
activation. Once activated, DAP displays the patient radiation dose
measurement for each exposure. The radiation dose measurement is
also archived with the patient data.
If the DAP feature is licensed on your system:
• The DAP value of the scan is listed on the dialog that is
displayed after clicking the Preview or Capture buttons on
the Acquisition screen, prior to scanning the patient for
either a CT or PAN scan.
To Next Page
Loading...