990400 Rev C 2010 May 1
Tools
10-7
Export a Rotated CT study
A rotated study is a study with volume rotation applied. After a study
is rotated, the Export DICOM >Rotated Study option becomes
active. When this option is selected, a rotated study is exported to the
specified DICOM Export Destination Folder.
1. Click (highlight) a patient from the Study List. Allow time for
the Patient Image to load.
2. See Rotating Views for instructions on how to rotate a study.
3. From the Main menu, select Tools > Export DICOM >
Rotated Study. A Please Wait dialog displays until export is
done.
If the Add rotated volume as a new study when exported
checkbox is selected on the Setup dialog, the rotated study is
exported as a new study and will be listed as a separate study in the
patient’s Study List when it is imported. The Rotated column in the
Study List indicates if the study is rotated.
If Auto Send is enabled on the system and the Add rotated volume
as a new study when exported checkbox is selected on the Setup
dialog, then the rotated study is automatically sent to the specified
PACS. See Add Rotated Volume and PACS for more information on
these options.
Export Sure Smile Studies
Studies to be sent for Sure Smile processing must be acquired at:
Size: Diameter 16 cm, Height 13 cm
Resolution: 0.25 voxel, 26.9 Seconds
Quantum IQ: NOT selected
Studies then must be reconstructed at :
Size: Diameter 16 cm, Height 8 cm
Resolution: 0.2 voxel, 26.9 Seconds
Quantum IQ: NOT selected
See
Viewing and Reconstructing Raw Patient Scans for instructions on
reconstructing a scan.
1. Select patient and study from the Study List. Allow time for the
Patient Image to load.
To Next Page
Loading...