17-19 Operators’ Manual
990400 Rev C 2010 May 1
8-14
Setting Filters for a Single Image
To change the filter setting for an individual image:
1. Right-click image and select Set Filter > and select filter setting.
The selected filter setting is applied.
Setting Filters for One or More Image Types
To change the filter setting for one or more image types:
1. From the Main menu, select Tools > Filter Settings > Set
Filters
2. Select a tab at the top of the dialog box which contains the screen
to change the filter setting.
3. Select check boxes to change the filter settings.
4. Click OK. The dialog box closes and the selected filter settings
are applied.
To Next Page
Loading...